AquaGuard Flat - Quart - Best topcoat Varnish
Product Description
AquaGard is a clear, furniture quality, durable, water base acrylic material. It is used as a top coat to increase the durability of a decorative finish.
AquaGard™ is a clear anti-yellowing finish coat available in gloss, satin, dull, and clear flat. AquaGard™ may be applied by brush, roller, or spray and may be thinned up to 20% with tap water if desired. AquaGard™ is our most widely used clear coat product. It has good wear and chemical resistance. AquaGard™ is normally used as a protective clear coat on walls and furniture, but on table tops, AquaGard™ should be top coated with Aquathane™ for maximum toughness. AquaGard™ can be polished and rubbed smooth with steel wool and compounds after it has dried for at least 72 hours. AquaGard™ can also be used as a concrete sealer as well as a clear top coat on decorative finishes when working on concrete, but should be top coated with Aquathane™ for maximum durability on walked on surfaces. AquaGard™ should not be applied below 55 degrees F because application at low temperatures reduces the ability of this product to properly obtain a good film formation, thus reducing its durability.
Covers Approximately 400 sq ft per gallonAvailable in Gloss, Satin, Dull, and Clear-Flat.
Sold in quarts and gallons.
Shipping is UPS Ground.



